Pollutants and hazardous substances are our
theme!
Industrial production without the use of chemicals is
unthinkable. Starting with toys via domestic appliances, textiles, leather
products, furniture up to construction materials, nothing is possible without
chemical raw materials, chemical catalysts or chemical aggregates. No doubt
about it, chemicals are indispensable and can be controlled to ensure they are
beneficial.
But the way we handle and use chemicals also entails risks and
dangers. Spectacular incidents regularly document the fact, that through
ignorance, carelessness and/or deficient technology, pollutants/hazardous
substances find their way into products, the environmental media of water, soil
and the air or into buildings thus jeopardizing human health.
To ensure that
you are always on the safe side in the evaluation of pollutants in products and
the environment media as well as hazardous substances at the workplace and in
buildings, we are at your service with comprehensive expertise, accredited
according to DIN EN 45001.
Incidentally, this also applies to
"self-replenishing" hazardous substances such as moulds and fungi, in other
words, microbiology and hygiene.
| One-Stop Testing Procedures / Safety Approval Procedure
|
To get one of these certificates GS/CoC/TÜV / TÜVNRTL / NOM / S+/ Nordic Approvals / GOST R / CB/S-Mark / others and for technical inspections, the procedure is as follows:
1. Introduction Meeting
2. Technical Meeting
3. Precheck
4. Inspection
5. Preparation of documentation & test report
6. Certification
7. Annual factory inspection
1. Introduction Meeting
We will hold an Introduction Meeting at our office or at yours so that we can get to know you and
·
. introduce TÜV Rheinland to you
. explain the procedure of the safety approval
. explain our fees
. schedule the testing and make an estimate (first time clients only)
. receive your application (application form)
2. Technical Meeting
After the Introduction Meeting follows a Technical Meeting to investigate applicable EU directives (if you apply for a European testmark)
. investigate applicable standards
. perform technical Q&A
Note: Experienced clients may skip steps 2 and 3.
3. Precheck
Next, we do a precheck and devise a test plan. That means
· TÜV Rheinland performs a brief construction check of the product
. we explain the inspection procedure
. we explain the inspection items and which documents are required
. we explain the required test equipment
Note: Experienced clients may skip steps 2 and 3.
4. Inspection
Then follows the inspection with
· witness testing
· construction check
. technical documentation evaluation
· component evaluation
· verification of test results / procedure
· verification of test equipment
· documentation handling
5. Preparation of documentation & test report
Afterwards, TÜV Rheinland will prepare the documentation and issue the
test report (optional).
6. Certification
· issue of various safety licenses
· issue of certificate of conformity (optional) and provide the necessary declaration forms
7. Annual factory inspection
To verify the quality system of the production line, we perform
regular factory inspections according to the relevant underlying
regulations ( annually or every 2 years, depending upon the certificate).
|
